Services, Capabilities & Products

Lakewood Energy Services’ Process and Technology

Lakewood Energy Services Energy owns and operates specialized and propietary industrial equipment and technologies that, along with our considerable field expertise, allow us to efficiently recover the residual crude oil from petroleum production, storage, pipelines and refinery byproduct streams. The Lakewood Energy Services process incorporates a combination of centrifuge technology, gravitational force, heat, chemical and machinery technologies to separate and recover the residual crude oil from liquids, sludge and solids. The separation and recovery process yields three product streams:

Crude oil with typically less than 0.5% impurities which is then able to be sold as pipeline quality crude oil. This is our main product and is comparable to any other crude oil being sold to the pipeline as supply to petroleum refineries.

Produced waste water suitable for discharge into disposal injection wells (a standard process for oilfield produced water).

Solids and sludge which meet or exceed established regulations governing land replacement and/or use as a raw material for the manufacture of value-added products (e.g. road oil, aggregate, asphalt) depending on the location of our reclamation project.

Products

Asphaltene Based Oil (ABO)

ABO can be custom blended to meet asphalt content needs.

Typical Physical Properties

API Gravity @ 60° F ............  26.30

Weight Lbs/Gallon @ 60° F ..  7.467

Flash Point° F .........................  310°

Fire Point° F ...........................  360°

Pour Point° F ...........................  -25°

Aniline Point° F ......................  211°

Viscosity @ 212° F (SUS) .........  57

Fluorescence ..........................  none

Lubricity Coefficient ..............  .109

EP Film Strength, psi ...........  17,470

Laboratory Tested

Field Proven

Quality Assured

Improves down hole lubricity in both straight and or directional holes.
Retards sloughing shales and helps prevent stuck pipe. Aids in logging and casing operations. Lowers API water loss and aids in removal of fine drill solids.
Reduces torque & drag on drill string. Minimizes “twist off” problems.

For more information please contact:
Lakewood Energy Solutions: 918.392.9356

Spotting Fluid

Lakewood Energy Solutions Spotting Fluid is a pipeline grade crude oil with the lowest percentage of impurities Lakewood Energy Solutions can manufacture. Lakewood Energy Solutions Spotting Fluid is best used for spotting around stuck drill pipe because of its low impurities. It quickly penetrates wall cake and helps reduce hydrostatic pressure. Lakewood Energy Solutions can also add an acid or your choice of other additives to the spotting fluid for improved wall cake deterioration to free stuck pipe.

Lakewood Energy Solutions Spotting Fluid can be added to mud to build oil content. This helps minimize stuck pipe due to its high film strength. This also improves penetration rates due to the resulting lower lubricity coefficient.

Typical Physical Properties

API Gravity ..........................  28-32

% BS&W ................................  .005

Viscosity ..............................  44 sus

Weight Lbs/Gallon ..............  6.7-7.0

Pour Point ...............................  -35°

Flash Point .............................  148°

WT% Asphaltenes .......................  0

Lubricity Coefficient ........... . 0.117

EP Film Strength, psi ...........  35,533

For more information please contact:
Lakewood Energy Solutions: 918.392.9356